ዜና


ቤት / ዜና / የጉምሩክ ቆርቆሮ ሳጥን በጅምላ-አስፈላጊ የቴክኖሎጂ መሣሪያዎች እና ዘዴዎች

የጉምሩክ ቆርቆሮ ሳጥን በጅምላ-አስፈላጊ የቴክኖሎጂ መሣሪያዎች እና ዘዴዎች

2020-05-12 ህ

ብጁ ቲን ሣጥን ጅምላ ሻጭ-ለጥራት ማረጋገጫ የሚያገለግል ቴክኖሎጂ

ባለፉት ዓመታት ብጁ ቆርቆሮ ሳጥን በጅምላ አምራች ተወዳጅነት አገኘ ፡፡ ቲን ማሸጊያ የበርካታ ኢንዱስትሪዎች አስፈላጊ አካል ይሆናል ፣ ምግብ በላያቸው ላይ ነው ፡፡ በየቀኑ በሚሊዮን የሚቆጠሩ ቆርቆሮዎች ወደ ገበያው ይገባሉ ፡፡

To ensure the quality of these cans, there are several inspection standards intact. However, it seems that despite the extensive efforts of plant quality control systems, there is still a small percentage of cans that are defective.

These cans tend to have an adverse impact on the integrity of tin packaging. In addition, they sometimes end up contaminating the food products which is extremely dangerous for human health. Therefore, manufacturers should incorporate quality control operations within their manufacturing plants.

However, it seems that the inbuilt quality control operations have limited capabilities in terms of analytical chemistry. To ensure the quality of the cans, the companies either rely on independent laboratories or the manufacturer’s laboratory.

These laboratories help find and characterize the problems with the cans. In addition, they assist in removing the root cause by troubleshooting the operations. There are different types of technology that you use for the identification of the problem.

In this article, we are going to focus on some of these technologies. So, without any further delay, let us get straight to the point!

Identifying and characterizing Tin Box Defects

For more than 100 years, the food packaging industry has been using tin-plated steel cans to preserve and increase food life. Over the years, there has been great progress in terms of box designs, materials, external or internal protective coating, chemical process monitoring, manufacturing equipment, quality instrumentation, and quality control methods.

The quality and the integrity of the tin box depend upon their manufacturers. They need to ensure that cans or boxes are of high quality. Once, they are sure of the quality, the next step is to send them to the food industry for food storing purposes.

Despite the rigorous quality control procedures, something defective tin boxes end up in the market. They manufacturer learns about them via customer complaints. In this case, they use their internal and incoming quality controls to eliminate the respective problem in the next batch.

In worst cases, the manufacturer might have to shut down the production line in order to determine the cause of the defect. After all, determining the root of the problem would be highly important to the manufacturer.

Manufacturers do use a number of technologies to determine the defect in an effective and efficient manner.

Custom Tin Box Wholesale

Techniques and Technology

Major tin can manufacturer today produce several hundred thousand to several million cans every day. Therefore, any defect identified during the quality control procedure will have a major impact.

It means that all the cans produced in that particular batch are highly likely to have that particular defect. This is something the manufacturer cannot afford every now and then.

In most tin-plated and aluminum steel cans, the manufacturer applies an organic protective coating on the interior of the can. The purpose of the coating is to prevent the food from having direct contact with the tin.

Checking the metal exposure inside the can is among the major quality control tests. The manufacturer use Enamel Rater instrumentation to determine metal exposure. What happens is, you fill a sampling can with electrolyte.

The electrolyte than absorbs into the liquid and it comes in contact with the side or the bottom of the can. Then, you will apply voltage to the can. The voltage needs to be directly proportional to the amount of exposed metal.

In case the amount of exposed metal is great, the can is rejected. However, an extremely small amount of exposed metal is acceptable. There are gas bubbles that are due to the reversing system’s polarity. The electrochemical reactions cause these bubbles.

The inspector uses these bubbles to identify the exposed area. In case, the area is great, the troubleshooting process starts effectively.

ዝቅተኛ ኃይል ማይክሮስኮፕ ምርመራ

የብረታ ብረት መጋለጥ ጉድለቶችን ለመለየት የብጁ ቆርቆሮ ሳጥን ጅምላ አምራቾች አምራቾች የጣሳዎቹን ምስላዊ ምርመራ ከዝቅተኛ ኃይል ማይክሮስኮፕ ጋር ይጠቀማሉ ፡፡ በአጠቃላይ አምራቹ ስቴሪዮ ማይክሮስኮፕን ይጠቀማል ፡፡

ሆኖም ፣ ሌሎች ዓይነቶች ማይክሮስኮፕም እንዲሁ ይገኛሉ ፡፡ ዓሦች እና ሸክላዎች አምራቾች ሊወስኗቸው ከሚፈልጓቸው የተለመዱ ጉድለቶች መካከል ናቸው ፡፡ እነሱ በብረቱ ላይ የሽፋኑ ክብ መሟጠጥ ናቸው። መከለያው በአጠቃላይ ከጠጣር ብክለት ነው ፡፡ በአንዳንድ ሁኔታዎች የማሽን ዘይት ጭጋግን ጨምሮ የማይጣጣም ፈሳሽ ነው ፡፡

አንዳንድ ጊዜ የተጋለጠው ብረት በሸፈነው ብልሹ አረፋዎች ምክንያት ነው ፡፡ እነዚህ የሚከሰቱት ቆርቆሮውን ለመሸፈን በሚፈውስ ምድጃ ውስጥ በሚሆንበት ጊዜ ነው ፡፡ ብረትን ወደ ምርቱ መጋለጥ ወደ ሁለት ዋና ችግሮች ያስከትላል ፣ የመጀመሪያው የብረት መበላሸት እና ሁለተኛ ወደ ብረት ወደ ምርቱ መሰደድ ፡፡

የብረት መበላሸት በመጨረሻ ምርቱን ማፍሰስ ያስከትላል ፡፡ አንድ ነገር ፣ ሁሉም የአምራች ፍላጎቶች በሁሉም ወጪዎች ለማስወገድ። በአብዛኛዎቹ ሁኔታዎች አምራቹ ለብክለት ለመለየት የሚያስፈልጉትን የትንታኔ መሳሪያዎች አይጎድልም ፡፡

ስለሆነም ለተጨማሪ ትንታኔ ናሙናውን ለሌላ ላቦራቶሪ መላክ ይኖርባቸዋል ፡፡

የማጣበቅ ሙከራ

የቲን-ሳጥኖች አምራቾች የውጭም ሆነ የውስጠኛው ሽፋን የማጣበቅ ባህሪያትን ለማጣራት የሚያካሂዱበት ሌላ የተለመደ ሙከራ ፡፡ የተለመደው የማጣበቅ ሙከራ የጣሳዎቹን የጎን ግድግዳዎች ከቆረጡ በኋላ ጣሳዎቹን በሙቅ ውሃ ውስጥ ማጠጥን ያካትታል ፡፡

ጣሳዎቹን ከሙቅ ውሃ ውስጥ ካስወገዱ በኋላ ደረቅ እና የሽፋኑን መቦረሽ ይደረጋል ፡፡ በመቀጠልም በፀሐፊው ምልክቶች ላይ ቴፕ ማመልከት አለብዎት ፡፡ ከዚያ ያንን ቧንቧ ወዲያውኑ ያንሱ። ሁኔታ ውስጥ ፣ አንዳንድ ሽፋን በቴፕ ይወጣል ፣ አምራቾቹ ወዲያውኑ ቀጣዩን እርምጃ መውሰድ አለባቸው።

የመላ ፍለጋ ሂደቱን ወዲያውኑ መጀመር ያስፈልጋቸዋል። ኮት ማጣበቂያ አለመሳካት ብዙውን ጊዜ ያልዳኑ ወይም ከመጠን በላይ የመፈወስ ሁኔታዎች ውጤት ነው። በተጨማሪም የወለል ብክለቶች እንዲሁ ይህንን ችግር ሊያስከትሉ ይችላሉ ፡፡

ለማጣበቂያ ውድቀት ትንተና አምራቹ በአጠቃላይ ወደ ትንተና ላቦራቶሪዎች መዞር አለበት ፡፡

የላቦራቶሪ መሳሪያዎች

የትንታኔ ላቦራቶሪዎች ብጁ የቆርቆሮ ሳጥንን በጅምላ ለመተንተን የሚጠቀሙባቸውን በርካታ መሣሪያዎችን በሚገባ የታጠቁ ናቸው ፡፡ ከዚህ በታች እነዚህን የመሳሪያ መሳሪያዎች ዘርዝረናል ፡፡

ኦፕቲካል ማይክሮስኮፕ

There are two different types of optical microscope, compound, and stereomicroscope. You can use both these microscopes depending on the defect observing filters and the lighting conditions. In certain cases, these microscopes are also used for performing microchemical tests.

These tests are effective when it comes to characterizing contaminants. In addition, you can use them for examining metal’s polished cross-sections and fractures.

Scanning Electron Microscope

Scanning Electron Microscope (SEM) is another popular device used for the inspection of custom tin box wholesale. They sometimes are used together with optical microscopes in order to determine the defects of the cans.

ብዙውን ጊዜ ላቦራቶሪዎች ይህን ልዩ ዘዴ ኦርጋኒክ ንጥረ-ነገሮችን ለመለየት ያገለግላሉ ፡፡ በተጨማሪም, ግልጽ የሆኑ ምስሎችን ማንሳት ይቻላል. ስለሆነም የጣሳዎቹን ስብራት ለመተንተን ቀላል ማድረግ ፡፡

የኢንፍራሬድ ስፔክትሮስኮፕ

በአጠቃላይ ሰዎች ኢንፍራሬድ ስፔክትሮስኮፕ የፉሪየር ትራንስፎርሜሽን ኢንፍራሬድ ስፔስኮፕስኮፕ ብለው ይጠሩታል ፡፡ የእነዚህ መሳሪያዎች ዋና ዓላማ እንደ ቫርኒሽ ፣ inks ወይም ዘይቶች ያሉ ኦርጋኒክ ቁሳቁሶችን ለይቶ ማወቅ ነው ፡፡ በተጨማሪም የኬሚካል ንጣፎችን ለማፅዳት ይረዳሉ ፡፡

ብዙውን ጊዜ በማኑፋክቸሪንግ ሥራዎች ውስጥ እነዚህን ገጸ-ባህሪያትን እናያለን ፡፡

Custom Tin Box Wholesale in china

የቀኝ አምራች አስፈላጊነት

ለብጁ ቆርቆሮ ሳጥን በጅምላ ፣ በቆርቆሮ ሳጥን አምራች ረገድ ትክክለኛውን ውሳኔ ማድረጉ ለእርስዎ በጣም አስፈላጊ ነው ፡፡ በአንድ አማተር ላይ መተማመን በመጨረሻ ወደ መጥፎ የምርት ስም ይመራዋል። በቀላሉ ማንኛውንም የዘፈቀደ የስጦታ ሳጥን አቅራቢን በመምረጥ መሄድ አይችሉም ፡፡

ከፍተኛ ጥራት ያላቸውን ቆርቆሮ ሳጥኖች ብቻ እንደሚያቀርቡ ለማረጋገጥ ለጥራት ቁጥጥር ስርዓቶቻቸው ትኩረት መስጠት አለብዎት ፡፡ ከብዙ ቆርቆሮ ሳጥን አምራቾች መካከል ቲን-ማሸጊያ አለዎት ፡፡ እነሱ መሪ የስጦታ ሳጥን አቅራቢ ናቸው ፡፡

ከፍተኛ ጥራት ያላቸውን ቆርቆሮ ሳጥኖች ያደርሱ ነበር ፡፡ ጥራታቸውን ለማረጋገጥ የቆርቆሮ ሳጥኖቻቸውን ከባድ የመተንተን እና የሙከራ ቴክኒኮችን እንዲያልፉ ያደርጋሉ ፡፡ ከዚያ ጀምሮ እያንዳንዱ የቆርቆሮ ሳጥን ፍጹም እና ከስህተት ነፃ መሆኑን ያረጋግጣሉ።

ለነገሩ የቲን-ማሸጊያ ከአሁኑ እና ሊጠቀሙ ከሚችሉ ሸማቾች ጋር ለስላሳ እና ለረጅም ጊዜ የሚቆይ ግንኙነት እንዲኖር ማድረግ ነው ፡

ከላይ