Nouvelles


Accueil / Nouvelles / Processus de production de boîtes à thé

Processus de production de boîtes à thé

17/02/2020 hqt

Chaque boîte à thé est faite de matériau de fer-impression-découpe-estampage-assemblage-emballage-étape par étape.

(1) Iron material: Generally, after confirming the order, the most suitable iron material will be ordered according to the layout, including the type and size of the iron material. The iron material is usually stored directly in the printing plant. For the identification of the quality of the iron material, you can Generally, the method of visual inspection is to see if there are scratches on the surface, whether the texture is uniform, whether there are rust spots, etc. The thickness can be measured with a micrometer, and the hardness can be felt with a hand.

(2) Printing: Both the film and the typeset are ready for printing after being printed to the printing house. Usually, a template is provided for the printing house to follow the color. What should be paid attention to in the printing process is to see if the printing color palette keeps up with the template. Whether the positioning is accurate, whether there are stains, whether there are scars, and so on. The printers generally responsible for these problems can control it by themselves.

Le matériau en fer prévu est retourné à l'usine, le matériau peut être coupé et coupé en fonction du lit de coupe. La principale chose à laquelle il faut faire attention lors de la coupe du matelas est de voir si l'opérateur coupe selon la ligne du tranchant du couteau et si la longueur est constante et uniforme. Si les travailleurs se grattent lors du déchargement, etc., la qualité doit être vérifiée au poste d'exploitation initial.

(4) Estampage: C'est le pressage de pièces de fer sur une poinçonneuse. C'est la tâche la plus importante d'un pot. Habituellement, un pot peut être divisé en plusieurs étapes à compléter. Le processus général de la boîte en deux parties du couvercle Tiandi est le suivant: Couvercle: ligne ouverte de bobinage de matériau-solin. En bas: ligne ouverte d'enroulement de ligne de matériau-solin-pré-laminage.

Processus de la boucle inférieure de la couverture du ciel et de la terre (joint inférieur) Le processus de la boîte de conserve, couvercle: ouverture de la ligne d'enroulement du bord du matériau d'ouverture du corps de la boîte: matériau d'ouverture-pré-pliage-coupe angle formant le bouton du corps de poinçon (bouton en bas )-quatrième de couverture. Le processus du bas est le suivant: l'ouverture du matériau est généralement la plus grande perte du produit pendant le processus d'estampage. Faites attention à savoir si le travail est standardisé, si la surface du produit est rayée, s'il y a des lots de coutures et si le col est fermé. La pratique habituelle consiste à organiser la confirmation de la production de gros échantillons avant la production de gros produits et à produire selon les grands échantillons confirmés, ce qui peut réduire beaucoup de problèmes.

(5) Packaging: After the production is finished, the packaging department is responsible for cleaning and assembling, putting it into plastic bags and packing. This part is the finishing work of the product. The cleaning of the product is very important. Therefore, it is necessary to do the cleaning work before packaging, and then pack it according to the packaging method. The products with many styles must be matched with the model number and box. put. What should be paid attention to during the packing process is to minimize the inflow of defective products into the finished product, and the packing quantity must be accurate.

Haut