Berita


Rumah / Berita / Proses produksi kotak timah teh

Proses produksi kotak timah teh

2020-02-17 hqt

Setiap kaleng teh terbuat dari bahan besi-pencetakan-pemotongan-stamping-perakitan-pengemasan-langkah demi langkah.

(1) Iron material: Generally, after confirming the order, the most suitable iron material will be ordered according to the layout, including the type and size of the iron material. The iron material is usually stored directly in the printing plant. For the identification of the quality of the iron material, you can Generally, the method of visual inspection is to see if there are scratches on the surface, whether the texture is uniform, whether there are rust spots, etc. The thickness can be measured with a micrometer, and the hardness can be felt with a hand.

(2) Pencetakan: Film dan set jenis siap untuk dicetak setelah dicetak ke percetakan. Biasanya disediakan template untuk percetakan mengikuti warnanya. Yang harus diperhatikan dalam proses pencetakan adalah melihat apakah palet warna pencetakan sesuai dengan template. Apakah penempatannya akurat, ada noda, ada bekas luka, dan sebagainya. Printer yang umumnya bertanggung jawab atas masalah ini dapat mengontrolnya sendiri.

bahan besi inted dikembalikan ke pabrik, bahan dapat dipotong dan dipotong sesuai dengan tempat tidur pemotongan. Hal utama yang harus diperhatikan saat memotong kasur adalah untuk melihat apakah operator memotong sesuai dengan garis tepi pisau, dan apakah panjangnya konsisten dan seragam. Apakah para pekerja saling menggaruk saat pemakaian, dll., Kualitasnya harus diperiksa di stasiun operasi awal.

(4) Stamping: Ini adalah menekan potongan besi pada mesin punching. Ini adalah tugas terpenting sebuah stoples. Biasanya, toples dapat dibagi menjadi banyak langkah untuk diselesaikan. Proses umum dari kaleng dua bagian tutup Tiandi adalah sebagai berikut: Tutup: buka jalur bahan-berkedip-belok. Bawah: garis pemintalan garis material-flashing-pre-rolling.

Heaven and earth cover bottom buckle process (bottom seal) The process of the can, lid: opening material-flashing edge-winding line can body: opening material-pre-bending-cutting angle-forming-button bone-punch body (button bottom)-back cover. The bottom process is: the opening of the material is usually the biggest loss of the product during the stamping process. Pay attention to whether the work is standardized, whether the surface of the product is scratched, whether there are batches of seams, and whether the collar is fastened. The usual practice is to arrange the confirmation of the production of large samples before the production of large products, and to produce according to the confirmed large samples, which can reduce a lot of trouble.

(5) Packaging: After the production is finished, the packaging department is responsible for cleaning and assembling, putting it into plastic bags and packing. This part is the finishing work of the product. The cleaning of the product is very important. Therefore, it is necessary to do the cleaning work before packaging, and then pack it according to the packaging method. The products with many styles must be matched with the model number and box. put. What should be paid attention to during the packing process is to minimize the inflow of defective products into the finished product, and the packing quantity must be accurate.

Puncak