Nieuws


Huis / Nieuws / Groothandel in blikken dozen op maat: belangrijke technologische apparatuur en methoden

Groothandel in blikken dozen op maat: belangrijke technologische apparatuur en methoden

2020-05-12 uur

Groothandel in blikken dozen op maat: technologie die wordt gebruikt voor kwaliteitsborging

Door de jaren heen wint de groothandel in blikken dozen aan populariteit. Blikverpakkingen worden een noodzakelijk onderdeel van verschillende industrieën, met voedsel daar bovenop. Elke dag komen er miljoenen blikjes op de markt.

To ensure the quality of these cans, there are several inspection standards intact. However, it seems that despite the extensive efforts of plant quality control systems, there is still a small percentage of cans that are defective.

These cans tend to have an adverse impact on the integrity of tin packaging. In addition, they sometimes end up contaminating the food products which is extremely dangerous for human health. Therefore, manufacturers should incorporate quality control operations within their manufacturing plants.

However, it seems that the inbuilt quality control operations have limited capabilities in terms of analytical chemistry. To ensure the quality of the cans, the companies either rely on independent laboratories or the manufacturer’s laboratory.

These laboratories help find and characterize the problems with the cans. In addition, they assist in removing the root cause by troubleshooting the operations. There are different types of technology that you use for the identification of the problem.

In this article, we are going to focus on some of these technologies. So, without any further delay, let us get straight to the point!

Identifying and characterizing Tin Box Defects

For more than 100 years, the food packaging industry has been using tin-plated steel cans to preserve and increase food life. Over the years, there has been great progress in terms of box designs, materials, external or internal protective coating, chemical process monitoring, manufacturing equipment, quality instrumentation, and quality control methods.

The quality and the integrity of the tin box depend upon their manufacturers. They need to ensure that cans or boxes are of high quality. Once, they are sure of the quality, the next step is to send them to the food industry for food storing purposes.

Despite the rigorous quality control procedures, something defective tin boxes end up in the market. They manufacturer learns about them via customer complaints. In this case, they use their internal and incoming quality controls to eliminate the respective problem in the next batch.

In worst cases, the manufacturer might have to shut down the production line in order to determine the cause of the defect. After all, determining the root of the problem would be highly important to the manufacturer.

Manufacturers do use a number of technologies to determine the defect in an effective and efficient manner.

Custom Tin Box Wholesale

Technieken en technologie

De grote fabrikant van blikjes produceert tegenwoordig elke dag honderdduizenden tot enkele miljoenen blikjes. Daarom zal elk defect dat tijdens de kwaliteitscontroleprocedure wordt vastgesteld, een grote impact hebben.

Het betekent dat alle blikken die in die bepaalde batch worden geproduceerd, hoogstwaarschijnlijk dat specifieke defect hebben. Dit is iets wat de fabrikant zo nu en dan niet kan betalen.

Bij de meeste blikken en blikjes van aluminiumstaal brengt de fabrikant een organische beschermlaag aan op de binnenkant van het blik. Het doel van de coating is om te voorkomen dat het voedsel direct in contact komt met het blik.

Checking the metal exposure inside the can is among the major quality control tests. The manufacturer use Enamel Rater instrumentation to determine metal exposure. What happens is, you fill a sampling can with electrolyte.

The electrolyte than absorbs into the liquid and it comes in contact with the side or the bottom of the can. Then, you will apply voltage to the can. The voltage needs to be directly proportional to the amount of exposed metal.

In case the amount of exposed metal is great, the can is rejected. However, an extremely small amount of exposed metal is acceptable. There are gas bubbles that are due to the reversing system’s polarity. The electrochemical reactions cause these bubbles.

The inspector uses these bubbles to identify the exposed area. In case, the area is great, the troubleshooting process starts effectively.

Low Power Microscope Inspection

Manufacturers of custom tin box wholesale use both the visual examination of the cans along with a low-power microscope to identify the metal exposure defects. Generally, the manufacturer uses a stereo microscope.

However, there are other types of microscopes available as well. Fisheyes and craters are among the usual defects that manufacturers need to determine. They are the circular dewetting of the coating on the metal. The coating is generally from a solid contaminant. In some cases, it is even the incompatible liquid including machine oil mist.

Sometimes the exposed metal is due to coating’s broken blisters. These occur when the can is in curing oven for coating. The exposure of metal to the product leads to two main problems, first metal corrosion and second migration of metal into the product.

The metal corrosion eventually results in leaking of the product. Something, all manufacturer’s needs to avoid at all cost. In most cases, the manufacturer lacks the required analytical instrumentations for contaminant identification.

Therefore, they would have to send the sample to some other laboratory for further analysis.

Adhesion Test

Another common test that tin-box manufacturers conduct to check the adhesion characteristics of both the external as well as the internal coating. The normal adhesion test includes soaking the cans into hot water after cutting open the can’s sidewalls.

Nadat de blikken uit het hete water zijn gehaald, worden ze gedroogd en wordt de coating beschreven. Vervolgens moet u tape over de afgetekende markeringen aanbrengen. Trek die kraan er dan onmiddellijk uit. Als er wat coating met tape loslaat, moeten de fabrikanten meteen de volgende stap zetten.

Ze moeten het probleemoplossingsproces onmiddellijk starten. Het falen van de hechting van de vacht is vaak het gevolg van te weinig of te veel uitgeharde omstandigheden. Bovendien kunnen oppervlakteverontreinigingen ook tot dit probleem leiden.

Voor analyse van adhesiefouten moet de fabrikant zich doorgaans tot analytische laboratoria wenden.

Laboratoriuminstrumenten

Analytische laboratoria zijn goed uitgerust met een aantal instrumenten die ze gebruiken voor het analyseren van de groothandel in op maat gemaakte blikken dozen. Hieronder hebben we deze instrumentaties op een rijtje gezet.

Optische microscoop

There are two different types of optical microscope, compound, and stereomicroscope. You can use both these microscopes depending on the defect observing filters and the lighting conditions. In certain cases, these microscopes are also used for performing microchemical tests.

These tests are effective when it comes to characterizing contaminants. In addition, you can use them for examining metal’s polished cross-sections and fractures.

Scanning Electron Microscope

Scanning Electron Microscope (SEM) is another popular device used for the inspection of custom tin box wholesale. They sometimes are used together with optical microscopes in order to determine the defects of the cans.

Gewoonlijk gebruiken de laboratoria deze specifieke methode voor het karakteriseren van anorganisch materiaal. Daarnaast is het mogelijk om beelden te maken die duidelijk zijn. Hierdoor is het eenvoudiger om de breuken van de blikken te analyseren.

Infrarood spectrosopie

Over het algemeen noemen mensen infraroodspectroscopie de Fourier Transform infraroodspectroscopie. Het belangrijkste doel van deze tools is om organische materialen zoals vernissen, inkten of oliën te identificeren. Ze helpen ook bij het identificeren van reinigende chemische oppervlakteactieve stoffen.

We zien deze oppervlakteactieve stoffen vaak in fabricageprocessen.

Custom Tin Box Wholesale in china

Belang van de juiste fabrikant

Voor de groothandel in op maat gemaakte blikken dozen is het van vitaal belang dat u de juiste beslissing neemt in termen van de fabrikant van blikken dozen. Op een amateur vertrouwen zou uiteindelijk tot een slechte merknaam leiden. U kunt gewoon niet zomaar een willekeurige leverancier van geschenkverpakkingen kiezen.

U moet aandacht besteden aan hun kwaliteitscontrolesystemen om ervoor te zorgen dat ze alleen blikken dozen van topkwaliteit leveren. Onder verschillende fabrikanten van blikken dozen heb je Tin-Packing. Zij zijn de toonaangevende leverancier van geschenkverpakkingen.

Ze zouden blikken dozen van de hoogste kwaliteit leveren. Om hun kwaliteit te verzekeren, laten ze hun blikken dozen rigoureuze analyse- en testtechnieken ondergaan. Ze zorgen ervoor dat elke blikken doos vanaf daar perfect en foutloos is.

Het doel van Tin-verpakkingis immers om een ​​vlotte en langdurige relatie te hebben met hun huidige en potentiële consumenten.

Top