주석 상자 제조업체 : 완벽한 아트 워크를위한 설계 가이드
주석 상자 제조업체 : 인쇄용 예술 작품 완성을위한 최고의 선택
For years, consumers have been falling in love with unique, beautiful, and robust tin-packaging. Their ability to be recycled further adds to their appeal. There is no denying that tin packaging ensures not only product safety, but also makes it possible for you to add your personal aesthetic touch to it. However, for this particular purpose, tin box manufacturers recommend the guide below to prepare your artwork for printing.
These rules are not a done thing. Of course, you can add and subtract what you like. Nonetheless, do they provide the basics for coming up with accurate printing artwork? Following these rules will help you design better.
Also, learn why tin is an excellent packaging material.
개인화 된 주석 상자에 물건이 어떻게 나올지에 대한 아이디어를 갖게 될 것입니다. 따라서 맞춤형 도시락에서 캔들 깡통에 이르기까지 원하는 유형의 깡통 상자에 관계없이 소비자에게 인상을 줄 수 있습니다.
소비자에게 감동을주는 방법에 대한 자세한 내용이 필요하면 블로그 게시물 "맞춤형 주석 상자로 인상을 만드는 방법"을 확인하십시오.
주석 상자 제조업체 : 인쇄용 아트 워크 준비 가이드
브랜딩을 최대한 활용하려면 최고의 아트 워크가 있어야합니다. 결국 포장, 색상 조합, 디자인 및 패턴은 내부에 무엇이 있는지를 나타냅니다. 혼잡 한 시장에서 소비자와 연결하려면 매력적이고 시선을 사로 잡는 포장을 갖추는 것이 중요합니다.
올바른 종류의 포장은 현재 소비자를 유지하는 데 도움이 될뿐만 아니라 새로운 소비자를 유치하는데도 도움이됩니다. 따라서 아트웍 디자인에 좋은 시간을 보내는 것이 좋습니다. 대기업조차도 브랜드 광고에 수백만 시간을 소비하는 경향이 있습니다.
대부분의 경우 브랜드는 몇 가지 요소를 염두에두고 설계됩니다. 예를 들어, 얼굴 유형, 색 구성표, 최종 인쇄 등은 발달 과정의 일부입니다. 템플릿은 캔버스와 같으므로 원하는 것을 추가 할 수 있습니다.
그러나 공간이 제한되어 있으므로 그 공간을 세심한주의가 필요합니다. 결국, 올바르게 사용 된 공간은 긍정적 인 결과를 생성하고 그 반대의 경우도 마찬가지입니다. 템플릿이 있으면 다음 질문에 답하십시오.
- 로고 배치, 로고를 중앙 또는 앞쪽에 배치 하시겠습니까?
- Is it a good idea to add your contact details? Moreover, is there room for adding the details of both contacts as well as social media?
- Do you believe that less is more?
- Do you need to incorporate a full paragraph of text along with a full-colored photo?
These are some important questions that require answers before you head onto the next step. Thus it is imperative to answer them. After all, answering them would help you achieve the perfect print.
Using a cutter guide will help you achieve accuracy in your artwork. So, for the creation of flat metal prints of the artwork, the factories use the cutter guide. Later these prints are converted into tin boxes. If your objective to achieve seamless tins, most tin box manufacturers would recommend printing solid colors to the body.
You also, paint solid colors to edges of the lid in combination to the body or just the lid edges. This mainly depends upon how you have thought of your design. The reason behind this is the stretch that artwork is subject to while the manufacturer pulls in into shape.
Add patterns or print text on either the lid or the base of your customized tin box. Below, is the Picture of a CUTTER guide template.
Note: This is a generic template, it may differ from manufacturer to manufacturer.
It would be wise to ask your manufacturer for their respective cutter guide. After filling in completing the cutter guide, it is time to send it to the factory.
There, they will create the prototype of your artwork.
Comprehending Point Sizes
Having a clear understanding of the point sizes is important. As it would define the future of your artwork on tin boxes. For starter, let’s focus on what exactly is a point.
In simple words, we can say that is it the smallest whole unit of measure. To define a point’s measurement, you would need the height of lettering. Every inch approximately has 72 points. In order to alternate the point size without a lot of hassle, we recommend using Adobe Illustrator.
Adobe Illustrator allows point editing with standard font size either with Arial or Times New Roman to be 12pt. After you are done selecting letters, you then need to focus on whether these littering will be printed properly as well as consider their legibility.
In case, you think littering is too small, a good idea to add to their volume is printing-infills. They would instantly make the text more prominent.
There are certain surfaces that cause the printing to bleed. The reason being, the applied ink tends to run out from the edges. The good thing about this is that most of the time is not noticeable. However, if you desire perfection, ask the tin box manufacturers to avoid such minor mistakes.
Moreover, the spread of ink can be troublesome especially when there are minute details and small text present in the design. Further, it would lead to infill, further reducing the quality of the printed product. To ensure the legibility of the text, you need to have a minimum point size of 0.4 for metal printing.
Below, is the table for the minimum font sizes for different materials.
|Branding Method||Screen Printing||Paid Print||Digital/Litho/Transfer||Embossing/ Debossing||Engraving|
This is an effective table; however, we do recommend that you think about the legibility of the consumer at the actual hundred percent size.
There are two different types of printing format, first is CMYK (Cyan, Magenta, Yellow, and Black) and the second one is RGB (Red, Green, Blue). The screen uses the RGB, whereas the printer uses the CMYK. To ensure that the print is the same as you have designed it, set to CMYK color standard instead of the screen’s RGB color standard.
Tin Box manufacturers insist on not missing this important step. This would ensure that print is the same as that of your image.
NOTE: When you convert your design from RGB to CMYK, it will turn a little duller. Therefore, you would have to brighten it up to have the previous impact.
Adobe Illustrator makes it easier to work with the original logo artwork. The *ai file extension is a vector-artwork program that allows the scalability of graphics to a great extent. Despite scaling the graphics, you will not lose the resolution. Its crisp and sharp lines are perfect for printing on metal.
Original Picture Size for Tin Box Manufacturers
Having the right resolution for your images that you get to print is imperative. If they lack the resolution, the print will not come out as desired. A good rule is to use the original picture size 1:1 & 300dpi.
If you have a minimum 300dpi, it would prevent imagery pixilation.
Correct Point Size and Fine Emboss Lines
If you want effective results, tin box manufacturers avoid designs with intricate shapes or fine lines. Avoid using fine lines as they would always generate ineffective results. Also, sticking to the correct size is important.
For metal, tin printing, you need to have a minimum of less than 0.4pt.
Remember, that the artwork is as important as the product that you plan to brand. Therefore, it is important to have the right product for the right job. We, being the leading tin packaging suppliers, would answer all your queries regarding tin packaging.
Our component team would help you guide you in the best possible way to ensure that your message and brand makes an impact. Just make sure that the artwork works with your brand.