Setiap tin teh diperbuat daripada bahan besi-percetakan-pemotongan-stamping-pemasangan-pembungkusan-langkah demi langkah.

(1) Bahan besi: Umumnya, setelah mengesahkan pesanan, bahan besi yang paling sesuai akan dipesan sesuai dengan tata letak, termasuk jenis dan ukuran bahan besi. Bahan besi biasanya disimpan terus di kilang percetakan. Untuk pengenalpastian kualiti bahan besi, anda boleh Secara amnya, kaedah pemeriksaan visual adalah untuk melihat apakah terdapat calar di permukaan, apakah teksturnya seragam, sama ada terdapat bintik karat, dll. Ketebalan dapat diukur dengan mikrometer, dan kekerasan dapat dirasakan dengan tangan.

(2) Printing: Both the film and the typeset are ready for printing after being printed to the printing house. Usually, a template is provided for the printing house to follow the color. What should be paid attention to in the printing process is to see if the printing color palette keeps up with the template. Whether the positioning is accurate, whether there are stains, whether there are scars, and so on. The printers generally responsible for these problems can control it by themselves.

bahan besi inted dikembalikan ke kilang, bahan boleh dipotong dan dipotong sesuai dengan tempat pemotongan. Perkara utama yang perlu diberi perhatian semasa memotong tilam adalah melihat sama ada pengendali memotong mengikut garis tepi pisau, dan apakah panjangnya konsisten dan seragam. Sama ada pekerja menggaruk antara satu sama lain ketika keluar, dan lain-lain, kualitinya harus diperiksa di stesen operasi awal.

(4) Stamping: Ini adalah menekan besi pada mesin meninju. Ini adalah tugas terpenting dari balang. Biasanya, balang boleh dibahagikan kepada banyak langkah untuk diselesaikan. Proses umum tudung dua kepingan Tiandi adalah seperti berikut: Tudung: garis terbuka-berkelip-berkelok-kelok. Bahagian bawah: garisan penggulungan bahan terbuka-berkelip-pra-putar.

Heaven and earth cover bottom buckle process (bottom seal) The process of the can, lid: opening material-flashing edge-winding line can body: opening material-pre-bending-cutting angle-forming-button bone-punch body (button bottom)-back cover. The bottom process is: the opening of the material is usually the biggest loss of the product during the stamping process. Pay attention to whether the work is standardized, whether the surface of the product is scratched, whether there are batches of seams, and whether the collar is fastened. The usual practice is to arrange the confirmation of the production of large samples before the production of large products, and to produce according to the confirmed large samples, which can reduce a lot of trouble.

(5) Packaging: After the production is finished, the packaging department is responsible for cleaning and assembling, putting it into plastic bags and packing. This part is the finishing work of the product. The cleaning of the product is very important. Therefore, it is necessary to do the cleaning work before packaging, and then pack it according to the packaging method. The products with many styles must be matched with the model number and box. put. What should be paid attention to during the packing process is to minimize the inflow of defective products into the finished product, and the packing quantity must be accurate.